PDA

View Full Version : Fermentation Chiller Question



Srink
04-08-2010, 10:43 PM
In my little corner of NC, i realized that during the spring/summer and into early fall, that im going to have issues with the temperture in the area and having successful fermentations. I have decided to build a fermentation chiller to remedy this problem. Which brings me to my issue, this is a standard 2" foam insulation chamber, complete with fans and thermostat. I was curious if anyone could give me some advice as to how i would run my wiring from power to thermostat to fan. I have a decent electrical background, but have never connected an inline thermostat and any assistance that could be provided would be appreciated.

akueck
04-09-2010, 01:59 AM
Have you searched the interwebz for "Son of Fermentation Chiller" (http://www.bayareamashers.org/gadgets/son_of_chiller.pdf)?

Srink
04-09-2010, 02:06 AM
That was the same plans that i looked at myself. He metions the procedure and where to place it, but im not sure which wire that i need to connect, and which wires dont matter.

Srink
04-09-2010, 02:14 AM
actually, nevermind, after rereading what was written and looking at his schematic one more time, i got it figured out. Thanks for your help.