PDA

View Full Version : ABV and Back Sweetening



Koryr6
12-15-2010, 05:26 PM
Hi all. I have searched through the forums and around the internet and haven’t been able to find a specific answer to my question.

I have made a couple of step by step recipes and am to the point that I would like to attempt a “do it from scratch” approach. I like the idea of taking a mead dry and then back sweetening to a desired level for somewhat reliable repeatability (is that a word? ;D).

My question is about ABV and how it is impacted by back sweetening
If for example, I was shooting for a 14% ABV, fermented to dry at .998, and back sweeten to 1.020 where should my starting gravity be?

According to the calculator, if I used it correctly. (I love this thing by the way)

Example 1: S.G of 1.127 taken to F.G of 1.020 = roughly 14% ABV

Example 2: S.G of 1.105 taken to F.G of .998 = roughly 14% ABV


Sooo which, if either, is correct? Should there be a 3rd example that somehow uses a measured amount of sweetened liquid at a known gravity to account for how the must is diluted?

Thanks in advance for info on this topic.

kudapucat
12-15-2010, 05:46 PM
ABV + alcohol by volume

It is approximated by SG - FG * 135 (135 is the constant used for mead, it's lower for lower alcohols like beer)

so 0.107 * 135 = 14.5%

You are correct. It is only the difference in gravity that matters (with this approximation), not where on the scale the difference appears.

When you backsweeten you are not adding any alcohol. but you are adding volume.

So simply if you have 14.5% alcohol in 1 gallon, then you have 0.145 gallons of pure alcohol in there.
If you add a pint of honey (That's a large amount, but it makes the math easier for me because SAE is not my first language) then you end up with 1.125 gallons with 0.145 gallons alcohol in it.
so 0.145/1.125 = 12.9 % ABV

Does that make sense?

the forumula you use is:


(original volume X ABV)
new ABV = __________________________________________

(original volume) + (backsweetened honey volume)


Of course, if you have live yeast in your must when you backsweeten, it will start to eat the honey, and FIIK what the ABV will be after that.

Koryr6
12-15-2010, 05:55 PM
That makes perfect sense! Thank you very much for the information and for the super quick response.

Medsen Fey
12-16-2010, 10:19 AM
In your example, starting at around 14.6% ABV, will leave you at 14% ABV after dilution when adding enough honey to raise the gravity by 22 points (roughly 0.55 pounds per gallon).

kudapucat
12-16-2010, 04:51 PM
Thanks medsen, I don't have a gut feel for the quantities. That's very helpful.
So the math behind what median said is this:

0.55 pound = 250 grams
Honey has an SG of about 1.4
250/1.4 = 180 mililitres
Or about a third of a pint. Or 6 FlOz (I think)
That's why with a sane amount of honey, as Medsen has suggested, the ABV changes by about a third as much.

phreebyrd
12-16-2010, 11:32 PM
so with this formula what would your sg be if you put 3pounds of honey in 1 gallon of water

kudapucat
12-17-2010, 12:40 AM
SG is defined as kg per litre at 20C. 1 Litre of water at 20 C weighs 1kg
(for most measuring tools - SI units would be at 25 C for lab conditions)

So it can be said that your gallon of water has an sg of 1.000 (at 20C)
1 gallon = 3.8 litres (approx)
so your gallon of water weighs 3.8kg

3 pounds = 1.36kg (approx)
honey has an SG of about 1.4 (1.4 kg/litre)
so your 3 pounds will take up almost a litre (1.36/1.4)

When you add you honey you will therefore have 3.8 + 1.0 = 4.8 litres of must

3.8kg + 1.36kg = 5.15kg / 4.8 litres = 1.07 kg/l

making your SG 1.07

Now substitue any other values to alter the calculation so you get a SG to your liking.

phreebyrd
12-17-2010, 01:49 AM
PM SENT dont wanna hijack this thread