Results 1 to 3 of 3

Thread: Fermentation Rises from the Dead

  1. #1
    Alkane Gotmead Visitor

    Default Fermentation Rises from the Dead

    I have a ~3 gal batch of a traditional mead. I have racked and watched the airlock activity go from nearly constant bubbles to no activity at all over a period of 2 months.

    About a month ago I decided to remove the airlock and place a rubber stopper in the carboy for bulk aging. Everything was going fine, my sg was measured at 0.999. The rubber stopper stayed in place for about 2 weeks. Until, I was sitting in the kitchen last week and heard "POP!". I looked around to find my rubber stopper rolling across the floor. Now the stopper will only stay on for about 1 day then it will shoot itself across the room.

    Is this normal

    The mead is a little hazy with a 1/2" bed of bright white lees on the bottom and a small amount of lees on the sides of the carboy.

  2. #2
    Join Date
    Dec 2004
    Location
    The OC
    Posts
    7,874

    Default Re: Fermentation Rises from the Dead

    Hey Alkane,

    Put an airlock back onto the carboy. It is still too soon to solid stopper it. The yeast have spoken.

    Next, what was the exact recipe? We'll need to see that in order to help you out a bit more. Also, at this point it's a good idea to start recording your gravity, and note whether or not the gravity is still dropping. When the gravity doesn't move for about three or four months. Then I'd say to rack it and consider kegging or bottling at that point.

    The important thing is to let the yeast run their course. There are certain yeasts out there that will continue to ferment very slowly for a long time. So you can't really put a solid bung in the vessel on a timeline unless you have used that yeast over and over, and know when you can and cannot do certain things during the lifecycle of the batch.

    Cheers,

    Oskaar
    Is it tasty . . . precious?

  3. #3
    Alkane Gotmead Visitor

    Default Re: Fermentation Rises from the Dead

    As always, Thanks Oskaar!

    I'll fill the airlock back up and stick it on there.

    The yeast I used was D-47 with about 3 tbsp of nutrient (from what I remember). I posted the exact recipe here

    I was hoping this was due to normal fermentation and not due to some sort of infection causeing the off-gassing. Since the stopper has been off of the carboy for an unknown amount of time.

Similar Threads

  1. dead link: the basics of mead fermentation
    By MattHollingsworth in forum Site Suggestions, New Toys and Tools
    Replies: 5
    Last Post: 05-27-2011, 02:58 AM
  2. Completely dead
    By kevdubs in forum Troubleshooting your Mead
    Replies: 20
    Last Post: 12-11-2008, 01:15 AM
  3. Dead Mead?
    By unclefrank1 in forum Troubleshooting your Mead
    Replies: 21
    Last Post: 09-15-2006, 10:05 AM
  4. Dead Batch II ?
    By Geoffrey Johnson in forum Troubleshooting your Mead
    Replies: 14
    Last Post: 04-13-2005, 11:20 AM
  5. The sulphite question rises again!
    By Ferretlady in forum Mead NewBees - Post your Questions Here
    Replies: 2
    Last Post: 03-02-2005, 10:32 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •