FerndalePalooza!30% Off Pairing Mead and Food!
Results 1 to 4 of 4

Thread: Visual signs of infection?

  1. #1

    Default Visual signs of infection?

    Very new to mead making. My first batch was as follows

    3lbs cranberry blossom honey
    1 gallon spring water
    4 vanilla beans cut in half lengthwise
    28g dried sweet orange peel
    1/3 packet lavlin 71b-1122 yeast

    I heated the vanilla beans and orange peels in small portion of the water to 160F for 15min. let it cool then added it to the 1 gallon carboy with the the rest of the water and the honey. I let it ferment for 2 weeks then racked it to secondary. it continued to slowly bubble for a little bit and some more yeast built up on the bottom so I racked it again. Both times I rinsed off the orange and vanilla beans and placed them back into the carboy. Now it is near crystal clear and deep burnt orange in color. The smell is lovely, very flowery. My concern over infection rises from the presence of small patches of white and black upon the surface. The black appears to be no more then granular pieces from inside the vanilla bean but they are surrounded by tiny air bubbles and a white foam. The whole surface isn't covered nor is there a ring or anything attached to the sides of the glass. Am I just being paranoid or is this an early sign of infection?

    Thanks,
    -Trep

  2. #2
    Join Date
    Mar 2011
    Location
    Ellabell, Georgia
    Posts
    624

    My Social Networking

    Add Riverat on Facebook

    Default

    Well I'd say the nose knows and the eyes have it...if it smeels good and looks good it probably is. Assuming a good active fermintation in the begining you probably have plenty of alcohol (don't suppose you have gravity readings?) tp protect it. If you don't have a hydrometer, do yourself a big favour and buy one (buy two, they're cheap and you'll break one when you most need it!) It would be nice to KNOW that it hadn't stalled.
    Have you tasted a tablespoon or two?
    You only go around once in life, but if you do it right, once is enough

  3. #3
    Join Date
    Jun 2006
    Location
    Ithaca, NY
    Posts
    4,958

    Default

    The black flecks are probably vanilla seeds, and those are good places for bubbles and yeast to stick to. If it smells and tastes fine, it's fine.
    Want to see something added to the GotMead Glossary? PM me! Didn't know we had a glossary? Check the top row of links.

  4. #4
    Join Date
    May 2005
    Location
    Between Jackson and Detroit
    Posts
    2,003

    Default

    Tiny black flecs and vanilla beans go hand in hand, just like the tiny spots in real vanilla ice cream. No worries...
    Bees stole my signature file!

Similar Threads

  1. No signs of fermentation, should I worry?
    By Shahivann in forum Mead NewBees - Post your Questions Here
    Replies: 24
    Last Post: 03-27-2011, 02:51 AM
  2. What signs do you use to determine when to put the air lock on?
    By keepitlow in forum Mead NewBees - Post your Questions Here
    Replies: 1
    Last Post: 08-06-2010, 12:51 AM
  3. Is this an Infection???
    By SpamDog in forum Troubleshooting your Mead
    Replies: 3
    Last Post: 02-11-2007, 04:22 PM
  4. Re: new years cyser 18 hours no signs of ferm. do I have a problem?
    By richard lambert in forum Troubleshooting your Mead
    Replies: 2
    Last Post: 02-05-2007, 04:25 PM
  5. Infection
    By jrigal in forum Mead NewBees - Post your Questions Here
    Replies: 9
    Last Post: 10-15-2005, 04:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •