Shop Bee Folks for your Honey!
Results 1 to 4 of 4
  1. Default Strange deposit after some time.

    Made a few meads some time back.
    One I bottled, 2 were left in DJ's.
    They were all clear when bottled or left. Passed through a filter.

    After a year the bottled Meads showed a deposit in the bottles, the deposit was not solid, looks bit strange almost "fuzzy".

    All the DJ's were clear. "Were".

    Couple opf weeks back I looked at the DJ's of mead.
    All show similar, the raspberry mead is now simply cloudy, cannot see through it al all. Was beautifully clear 6 months back and has been in the DJ for about 2 years. The spiced mead has the "fuzz" at the base now. The spiced mead is over 2 years old.

    All were made with honey from a supermarket.
    As I reacall around 4lbs to a gallon, 6 jars.
    None were boiled, just gently dissolved in warm water.
    All were racked twice and all went through a filter and were clear until about 2-3 months ago except the bottled meads - these threw the deposit 6-8 months ago.

    The DJ's had been clear for 18-24 months or more.

    I used the Gervin yeast, GV9 and Variantal D, different batches.
    Both have done the same.
    All were stabilised with Potassiun Sorbate.

    Could it be the storage temperature?
    They are stored in a kitchen and it can get cool/cold, as in ~12C (53-53F).

  2. #2
    Join Date
    Jun 2006
    Ithaca, NY


    There are common compounds that will cloud your mead when it gets cold. If you warm a bottle back up to room temperature, does it fix the cloudiness?
    Want to see something added to the GotMead Glossary? PM me! Didn't know we had a glossary? Check the top row of links.

  3. #3
    Join Date
    Feb 2008
    UK - South Coast.


    Not sure about the hazing, that could be that it needs checking like akueck suggests. The one with the fuzz ? I've also had formerly cleared meads drop additional sediments, though I didn't suss whether it was further yeast, pigmentation or what. Unless you back sweetened with honey, where it can easily be a protein haze. Which I've sorted with kwik kleer.....
    here's me home brewing blog (if anyones interested....)
    and don't forget
    What the large print giveth, the small print taketh away! Tom Waits.....

  4. #4
    Join Date
    May 2007
    The Fusel Shack, in the swamp west of Ft. Lauderdale, Florida


    When you don't boil your musts (and I'm not suggesting that you should), it is very common for protein sediment to develop over time. Even tight filtration won't prevent it. If you use a fining agent to "protein stabilize" you'll usually be able to prevent the unsightly sediment from forming. The sediment is not harmful, but it does not look pretty in the bottle. If you don't want to use a fining agent, extended bulk aging, and a "cold stabilization" may help to clear out most of the proteinaceous material. I've just reached the point where I prefer to use the fining agents in most cases.

    For a batch that went totally cloudy, I'd be suspicious that the yeast (or some other organism) is active. If you tried stabilizing with sorbate alone, that may be the reason as sorbate by itself is not reliable for inhibiting renewed fermentation.
    Lanne pase toujou pi bon
    (Past years are always better)

Similar Threads

  1. Strange Night
    By Angelic Alchemist in forum The Hive
    Replies: 12
    Last Post: 04-25-2010, 07:18 PM
  2. Strange transformation?
    By Kveld-Ulf in forum Troubleshooting your Mead
    Replies: 3
    Last Post: 07-08-2007, 04:45 PM
  3. Strange cloudy thing
    By palecricket1 in forum Troubleshooting your Mead
    Replies: 3
    Last Post: 09-29-2005, 04:12 PM
  4. Strange Experiences.
    By David Baldwin in forum The Hive
    Replies: 4
    Last Post: 07-23-2005, 03:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts