Shop Bee Folks for your Honey!
Results 1 to 5 of 5

Thread: Stuck ferment

  1. Default Stuck ferment

    Iím pretty new to making mead, Iíve only done a few batches at home and two with a friend at work, and have run into a problem with the batch I have now. I pulled a recipe online that called for hibiscus and hops, as well as 3.75# of honey per gallon which gave me a SG of 1.16. I pitched a pack of EC-1118 and it started bubbling away about a day later. Itís been in the cabinet for 3 weeks now and I checked it today, totally still. No bubbles on top, none rising through the liquid, and the airlock was still. Pulled a sample out to check gravity and it read 1.05. Could it have run itís course in that short a time?

    Thanks!
    Brendan

  2. #2
    Join Date
    Jun 2016
    Location
    Brookline, NH
    Posts
    715

    Default

    Yes, a fermentation could definitely finish in 3 weeks.

    Are you confident in your hydrometer readings? I'm wondering if the first reading might have been 1.116 (or 1.260) and the final reading is actually 1.005?

    Ec-1118 is pretty hard to stall. If your starting gravity was really 1.160 then you would have a potential ABV of 20%. If everything went as planned, 1118 would have reached its tolerance at around 18%, leaving you with a final gravity of around 1.014.

    Of course sometimes yeast don't reading the writing on the package :-)

    Maybe if you gave us some more details of your recipe and the process you followed, we can give you some feedback.

  3. Default

    Thanks for the quick answer!
    Batch Size 6g
    OG 1.146
    FG 1.036
    Honey 25lbs
    Boil 30min
    7 HBU .5 Ounce Magnum 30 Minutes
    2.5 HBU .5 Ounce Goldings 15 Minutes
    2.5 HBU .5 Ounce Goldings 5 Minutes
    7 Ounces Hibiscus

    That was the recipe I used, scaled down to a 1 gallon batch as a test. The gravities listed are from the post where I found the recipe, not my own. I canít be sure of my old reading, I was tired and rushing to get it measured before leaving for vacation the next morning. My current reading however is accurate.

    The airlock that I put on it in its new carboy does seem like its building a small amount of pressure, all the water displaces to one side instead of being balanced as it is when I put it on.
    Thank you for the help!

  4. #4
    Join Date
    Jun 2016
    Location
    Brookline, NH
    Posts
    715

    Default

    How much yeast did you use? Did you dump the yeast in or did you use some sort of hydration procedure?

    Fermentation temperature?

    Did you use any nutrients? If so, did you stagger them?

    As you went on vacation, I'm going to assume that you didn't do any daily degassing/stirring?

  5. Default Stuck ferment

    I used one pack(5g) of yeast, rehydrated according to the package, then stirred it in. I did use nutrients, one teaspoon when i added the yeast, as well as energizer at the same time. I didnít add any others, I hadnít even looked at it until today. As for fermentation temperature it was in the kitchen with an ambient temperature of 72, close to the heater. Iíve never stirred or degassed any of the batches Iíve done, I tend to just let them do their thing once i know they are fermenting.

Similar Threads

  1. Stuck ferment (or did it even start)
    By Markmp in forum Mead NewBees - Post your Questions Here
    Replies: 6
    Last Post: 03-09-2015, 01:58 PM
  2. Am I in Danger of a stuck/stalled ferment?
    By dougmedic in forum Mead NewBees - Post your Questions Here
    Replies: 6
    Last Post: 05-04-2008, 06:30 PM
  3. Slow Ferment or Stuck?
    By CBBaron in forum Mead NewBees - Post your Questions Here
    Replies: 7
    Last Post: 03-07-2008, 12:38 PM
  4. Is our Mead stuck, what does stuck mean???
    By wolf_tracker in forum Mead NewBees - Post your Questions Here
    Replies: 6
    Last Post: 02-28-2007, 06:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •