Shop Bee Folks for your Honey!Shop Bee Folks for your Honey!
Results 1 to 9 of 9
  1. Default Stalled fermentation

    I am making my first mead. I started it over 3 months ago using 14 lb natural wildflower honey, 5 gallons water, Wyeasr sweet mead yeast plus 3 tbs yeast nutrient. Initial Gravity was about 1.100. 2 months in the gravity dropped to 1.095, I added another tbsp nutrient. One month later the gravity is about the same. Should I just be patient, or is there something I can do to kick start it?

  2. #2

    Default

    Maybe I have just been lucky but the only time I have ever had a problem with fermentation not taking off was because of old yeast. I always make a yeast starter and go from there. I am not big into mead making (mostly wine) but a good yeast starter might help.

    What temperature do you have it at?

    Sent from my Nexus 7 using Tapatalk

  3. #3
    Join Date
    May 2007
    Location
    The Fusel Shack, in the swamp west of Ft. Lauderdale, Florida
    Posts
    8,771

    Default

    Welcome to GotMead Marc!

    Unfortunately, your mead is stuck.
    The Wyeast sweet mead strain is notorious for doing this to new mead-crafters. It is almost a rite of passage. The yeast needs careful pH and temperature management and can be a real pain. If it is cold, like in the 60's, you can try warming it up to room temp. If you can't check the pH, you can add a couple of tsp of potassium bicarb and see if things work. If that doesn't get it into gear, get another yeast - I'd suggest EC-1118 (or Red Star's Premier Cuvee). Rehydrate that yeast in 50-100 cc of 104 degree F water, and after 15 minutes add an equal amount of your stuck must. Wait until you see it start bubbling good - could take minutes to hours, and then add must to double the volume again. Repeat until you have greater than 1 liter of bubbling acclimated starter, then pitch this in and aerate the must well. That should do the trick.

    Endeavor to persevere!

    Medsen
    Lanne pase toujou pi bon
    (Past years are always better)

  4. Default

    It's currently at about 65 degrees. The yeast was active initially. The airlock bubbled, though very slowly. It seemed like a few bubbles a day. Much different than I'm used to with beer. The gravity dropped slowly over 4-6 weeks, but over the last month i don't think much is happening.

  5. Default

    As far as temp, mid 60's is room temperature (winter in Maine). I can check the pH; what is the target pH? If that doesn't work I'll try your yeast suggestion. Thanks for the assistance.

  6. #6

    Default

    I am not really a fan of putting a cover and air lock on at the beginning. I am not saying it would have made any difference in your case but I just keep a cloth over the top of the bucket and stir vigorously the first few days to keep some oxygen in the must and to keep the yeast suspended.

  7. #7
    Join Date
    Mar 2004
    Location
    Chicago area formerly Netherlands
    Posts
    2,481

    Default

    Forget what you know about brewing beer..... most of it will not apply to mead. However, you clearly DO have the patience for mead... waiting 2 months for fermentation to start is rather even more than even Chevette Girl would advise....

    Have you repitched yeast? Is it fermenting?

    Welcome to GoteEad !!
    Don't Panic!

    From Portugal to Poland, on a perpetual pursuit for more honey.....

    Issues unique to the Netherlands at
    http://www.gotmead.com/forum/showthr...880#post222880

  8. #8

    Default

    It seems that the mead is at the very minimum temperature for fermentation. Unless you have a way to calculate the exact temp of the must I suspect that the must is very possibly below the required range. The wyeast site suggests 65-75F. "About 65F" doesn't sound too good. I'd try getting it warmer somehow. Maybe move the must to some place warmer in the house. I'd personally go above 70F to be able to eliminate temperature as a stalling factor
    "Shouldn’t we say wine is a mead-like beverage made with grapes substituted for the honey?" - Steve Piatz

  9. #9
    Join Date
    May 2007
    Location
    The Fusel Shack, in the swamp west of Ft. Lauderdale, Florida
    Posts
    8,771

    Default

    Yes, warming up over 70°F may help. Ideal pH is about 3.6

    Sent from my THINGAMAJIG with WHATCHAMACALLIT
    Lanne pase toujou pi bon
    (Past years are always better)

Similar Threads

  1. Stalled?
    By 1k_wayne in forum Mead NewBees - Post your Questions Here
    Replies: 26
    Last Post: 07-19-2011, 08:06 PM
  2. Stalled fermentation in 5 gallon batch of JAOM
    By Lois in forum Mead NewBees - Post your Questions Here
    Replies: 4
    Last Post: 12-29-2010, 09:11 PM
  3. Am i stalled or has fermentation just run it's course?
    By ohiobr in forum Mead NewBees - Post your Questions Here
    Replies: 6
    Last Post: 10-31-2010, 10:11 AM
  4. Stalled fermentation
    By crimsondrac in forum Mead NewBees - Post your Questions Here
    Replies: 8
    Last Post: 09-20-2010, 03:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •