Boddingtons Cream Ale Clone Wanted

  • PATRONS: Did you know we've a chat function for you now? Look to the bottom of the screen, you can chat, set up rooms, talk to each other individually or in groups! Click 'Chat' at the right side of the chat window to open the chat up.
  • Love Gotmead and want to see it grow? Then consider supporting the site and becoming a Patron! If you're logged in, click on your username to the right of the menu to see how as little as $30/year can get you access to the patron areas and the patron Facebook group and to support Gotmead!
  • We now have a Patron-exclusive Facebook group! Patrons my join at The Gotmead Patron Group. You MUST answer the questions, providing your Patron membership, when you request to join so I can verify your Patron membership. If the questions aren't answered, the request will be turned down.

JoeM

NewBee
Registered Member
Jan 9, 2004
665
1
0
44
I'm looking for a recipe for a good clone of Boddingtons Cream Ale. Anyone know of such a thing or have any good ideas?
 
Sorry Joe, can't say I know a good recipe for you but hope you find one. I have fond memories enjoying Boddingtons at a pub around the corner from an old workplace. Like drinking a cloud. :)
Hardly got through those days without a couple of pints at lunch!!
 
Hey Joe,

I looked around, and the only thing I found was this one from Cat's Meow III:

It's for the Boddington's Special Bitter, and it looks to live up to the name.


Ingredients: (for 5 gallons)

* 6 lbs. (2720 g) English 2-row pale malt
* 1 oz. (28 g) black patent malt
* 3 ozs. (85 g) Cane (white table) Sugar
* 3/8 Cup (packed) soft dark brown sugar for priming
* 1 oz. (28 g) Fuggles hop pellets (4.5 alpha acid)
* 1 1/8 ozs. (38 1/2 g) E.K. Goldings hop pellets (4.6 alpha acid)
* 1/8 oz. (3.5 g) Northern Brewer hop pellets (7.6 alpha acid)
* 1 tsp gypsum added to mash water
* 1 tsp gypsum added to sparge water
* 1/4 tsp Epsom Salts added to kettle
* Wyeast #1968 Special London Ale (or other suitable ale yeast) made up to a 1 quart (1 litre) starter

Procedure:
Crush all grains and mash into 9 quarts of brewing water preheated to 130 degrees F (54 C). When grist is thoroughly mixed in with no dry spots, add 4 quarts of boiling brewing water and increase mash heat to 152 degrees F (66-67 C). Hold for two hours, stirring and returning to proper heat every 20 minutes or so. Mash out at 168 degrees F (76 C) for 5 minutes. Sparge with 3 1/2 gallons of 170 degree F (77 C) brewing water. Top up kettle to 6-6 1/2 gallons for full length boil.

Bring the wort to a boil along with the Fuggles hops and 3/4 ounce (21 g) of the E.K. Goldings hops. Boil 1 1/2 hours, adding the cane sugar during the boil. Add the balance of the hops for the last 15 minutes of the boil. If you use Irish moss, add 1 1/2 tsp. for the last 20 minutes of the boil.

Force chill the wort, rack it off of the trub into the fermenter being sure to aerate well, pitch the yeast starter and ferment to completion. Estimated FG of 1014.

Make up the dark brown sugar with a pint of water for priming, and bottle the brew. Sample after two weeks.

Malt Extract Recipe:

Substitute 5 pounds (2270 g) of amber dry malt extract (not Laaglander's, too dextrinous) for the pale malt. No grains are needed. Bring 2 gallons (8 litres) of brewing water to a full boil. As soon as the water boils, remove it from the heat and add sugar and DME. Stir until they are completely dissolved. Only then can you return the wort to the heat, add the hops as above, and return to a boil. Boil 1 hour, adding the last batch of hop pellets for the final 15 minutes. Again, Irish moss is optional.

Force chill and make up to the full 5 gallons (19 litres) with brewing water, aerate well and follow the directions for all grain for fermentation and bottling.

Sorry I didn't have anything in my old ale notes either, although it's such a nice English Ale I'm surprised it's not anywhere out there as a clone.

Hope that helps,

Cheers,

Oskaar