Sanitizing with alcohol

  • PATRONS: Did you know we've a chat function for you now? Look to the bottom of the screen, you can chat, set up rooms, talk to each other individually or in groups! Click 'Chat' at the right side of the chat window to open the chat up.
  • Love Gotmead and want to see it grow? Then consider supporting the site and becoming a Patron! If you're logged in, click on your username to the right of the menu to see how as little as $30/year can get you access to the patron areas and the patron Facebook group and to support Gotmead!
  • We now have a Patron-exclusive Facebook group! Patrons my join at The Gotmead Patron Group. You MUST answer the questions, providing your Patron membership, when you request to join so I can verify your Patron membership. If the questions aren't answered, the request will be turned down.

Johnnybladers

NewBee
Registered Member
Feb 13, 2006
301
0
0
50
Any thoughts on wiping down equiptment with either cheap vodka or rubbing alcohol? Getting tired of mixing relatively large(couple of gallons to soak stuff) amounts of Iodophor to be used once then tossed away only to mix more a couple of weeks later.
Thanks, Jon
 
I use sodium Bi-meta (at much stronger levels than what you add to your mead) for sanitizing, but I re-use it until I feel that I need some fresh stuff. It is usually mixed strong enough to burn your nose if you sniff it.

The clean-ness of the sodium bi-meta is dependent on what I have cleaned in it over the past month. I also like to rinse after sanitizing (that's a lot of boiled water), so that no off flavours get imparted by the bi-meta.
 
Jon,

Sanitizing with alcohol should work just fine.

Whatever you use, you may find it easier to use a spray bottle. That way you don't use as much and you don't have to mix up new stuff for every batch.


Cheers,
Jay
 
Jay
The spray bottle(with rubbing alcohol)was something I just started using last night for the hose and "stone" of the O2 system. That and the hydrometer and other assorted little repetitive stuff are what is a pain. I don't mind mixing a few gallons for the bucket or carboy and a bunch of stuff all at once.
Thanks, Jon
 
Isopropyl seems to be doing just fine for me. I use a commercial mixture used for cleanroom environments called Septihol (sp?)

But, there are some considerations for mixing it up yourself

Make sure you are using at least a 70% mixture, if you dilute from 100% try using distilled water.

I personlly like isopropyl better than ethanol (for cleaning only ;) ) Isopropyl is more viscous than ethanol and hangs out on surfaces longer.
 
I didn't even dilute it, I just poured plain old 70% isopropyl rubbing alcohol into a handy spray bottle(read used and well cleaned Windex bottle) sprayed it on and wiped it off allowing the remainder to quickly evaporate.
Thanks, Jon
 
I would strongly advise AGAINST using rubbing alcohol, Isopropyl Alcohol, to sanitize anything which will be used for making mead or anything to be consumed by a person. If you use alcohol get some cheap vodka or something about 140 proof or 70% ethanol. This level of ethanol is used in cell culture situations to kill anything which might be on growth media, work surfaces, etc and to maintain sterility.

Isopropyl alcohol is NOT good for people and according to a material safety data sheet on the stuff …

70% Isopropyl Alcohol
Emergency Overview
No data available.
Route(s) of Entry: Inhalation? Yes , Skin? Yes , Eyes? Yes , Ingestion? Yes
Potential Health Effects (Acute and Chronic)
No data available.
Carcinogenicity: NTP? N.A. , IARC Monographs? N.A. , OSHA Regulated? N.A.
Carcinogenicity/Other Information
No data available.
Signs and Symptoms Of Exposure
Early to moderate CNS depression may be evidenced by giddiness, headache, dizziness and nausea; in extreme cases, unconsciousness, respiratory depression and death may occur.

Medical Conditions Generally Aggravated By Exposure
Pre-existing eye and/or skin irritation, respiratory, and/or digestive disorders.

Basically please use ethanol to sanitize your equipment so you can enjoy your mead...
 
I appreciate your concern. Given that the wiped off alcohol evaporates immediately, I doubt ingestion is a huge concern. That being said, I'll check into higher octane vodka as most of the stuff I've seen in the state store is about 40%.
Thanks, Jon
 
Yeah, Yabodie has a good point.
You want to be careful using IPA (isopropyl alcohol).
There are some considerations when using this method.

- Always use in a well ventilated area.
- Rinse everything well. IPA has a strong aroma and can easily be detected with just a quick "whiff". If you even think you smell it, rinse some more.
- All it takes is just a quick mist to sterilize most surfaces. No need to drown anything in IPA.
- And FOR THE LOVE OF GOD!!! keep away from open flames. As most of us know alcohol will burn nearly invisible in sunlight.

And by no means am I saying this is the best way to sanitize your stuff, I'm just saying that if this is the method you choose, please use caution.